MPN: 2T-SJ-010V-3PCS-KT
Product Overview:
◎Standard Interface, Flexible Adaptation: The Valve Body Follows The ISO5211 Standards And Is Perfectly Connected With The F03/04/05 Actuator, Which Can Be Easily Adapted To A Variety Of Models To Meet Diverse Needs；
◎Strong Torque, Fast Response: 24VDC Rated Voltage, 20. N.M's Strong Torque Ensures That The Valve Can Complete The Operation Within 15 Seconds. It Is Suitable For Most Valve Bodies Below 15N.M, And The 0-10V Control Mode Makes Operation More Convenient；
◎Precise Positioning, Efficient Control: Built-In High-Performance Brushless Motor Control Module Realizes Precise Control Of Frequency And Speed To Ensure Accurate Valve Position. At The Same Time, The Motor Has Built-In Overload Protection To Prolong The Service Life；
◎Rugged And Aesthetically Pleasing: Featuring A Stainless Steel Three-Piece Body With Pressures Up To 2.0 Mpa (290 Psi), It Has Been Carefully Selected For Burr-Free Durability And A Service Life Of Up To 20,000 Cycles. The ABS Housing Is Not Only Sturdy, But Also Aesthetically Pleasing；
◎Real-Time Fault Monitoring, Worry-Free: This Motorized Ball Valve Is Equipped With Real-Time Fault Reporting, Whether It Is Stuck Or Other Faults That Cause The Valve To Fail To Fully Open And Close, It Can Instantly Detect And Output Warning Signals To Ensure The Stable Operation Of The System；
◎Automatic Return When Power Is Off, Safe And Efficient: Support 24VAC/DC 0-10V Control, And Automatically Return To The Closed/Open State When The Power Is Off, Ensuring The Safety And Efficiency Of Valve Control. Designed For Precise Flow Control, It Is A Core Component In The Industrial Sector；
◎Intelligent Display, Clear At A Glance: Equipped With A 1.3-Inch OLED Screen, No Visual Dead Ends, High-Highlight Display, Energy Saving And Environmental Protection. Real-Time Display Of Valve Opening And External Control Commands, About 5 Minutes After The Automatic Sleep State, At The Same Time Can Prompt The Position Status And Control Commands；
Product Detail:
◎ Valve Dimension: 1/2" 3/4" 1“ 1-1/4" 1-1/2" 2" BSP or NPT Thread Available;
◎ Switching Time: 10-15 Sec. From Closed To Open;
◎ Actuator Rated Torque: 20N.m;
◎ Normally Open or Normally Closed When Power Off;
◎ Recomand Install Below 15N.m Valvd Body;
◎ Maximum Working Voltage: 2.0Mpa(300PSI)
◎ Rated Voltage: 24V AC/DC;
◎ Position Feedback: 0-10V;
◎ Position Accuracy: ±1%(Set By Software);
◎ Connection Standard: ISO5211 F03/F04/F05;
◎ Adopted High-Performance Brushless Motor, Overload Protection of Internal Motor;
Electrical Data:
◎ Rated Voltage: AC/DC24V (AC18-26V; DC22-32V);
◎ Power Consumption: 9.6W @Running, 0.85w@Holding;
◎ Peak Current: 350mA@5ms;
◎ Connecting Cable: 7*0.2mm² Cable, Voltage Withstand AC300V;
◎ Fuse: 2A;
Functional Data:
◎ Rated Torque: 20N.m;
◎ Angle Of Rotation: 90°±2°;
◎ Max Angle Of Rotation: 330°±5°;
◎ Manual Operation: ※ Matching Hexagon Wrench, Wsing At No Power;
◎ Running Time: About 10S(Per 90°);
◎ Continuous Running: Continuous Running;
◎ Sound Power Level: Max 50dB(A);
◎ Position Indicator: Mechanical and Screen;
Working Conditions:
◎ Electricity Safety Level: III Type (Safety Low Voltage);
◎ Inflaming Retarding Level: V0 UL94 Test Method;
◎ Enclosure: IP67 As Per En60529/GB4208-2008(All Directions); F Type Can Add Dehumidifying Heater ;
◎ Insulation Resistance: 100MΩ/500VDC ;
◎ Withstand Voltage: 500VAC, 1Min;
◎ Medium Temperature: ≤80° Can Install To Actuator Directly; ＞80° Need To Install Bracket or Heat Radiation Stand;
◎ Indoor or Outdoor; If Exposed To The Rain or Sunshine, Need To Install Protective Device For The Actuator;
◎ Not Explosion Proof Products, Do Not Use Them in Flammable and Explosive Environment;
◎ Ambient Temperature: -30℃ ~ 60℃;
