24VAC/DC 4-20MA 2 Way 1-1/4" 1-1/2" 2" Normally Open/Closed Proportional Integral Control Brass Motorized Ball Valve

$298.99

size: 1-1/2 inch

1-1/2 inch
1-1/4 inch
2 inch
Add to Wishlist

visamasteramazon paymentsamerican expressapple paypaypal
Description

Product Detail:                            
4-20ma Control Mode: 4-20ma Control Mode Is Adopted To Make Valve Control More Convenient. At The Same Time, It Is Designed With ABS Shell, Which Is Both Strong And Beautiful.
Durable Body: Made Of 1-1/4", 1-1/2", 2" Brass With A Working Pressure Of 1.5Mpa (217.5PSI), Carefully Selected And Polished To Ensure Burr-Free, High Durability And A Service Life Of Up To 20,000 Cycles.
Standardized Connection: The Valve Body Meets The ISO5211 Standard, Which Is Easy To Connect With The Actuator Of The F03/04/05 Standard, Adapting To A Variety Of Models, And Simplifying The Installation And Maintenance Process.
Real-Time Fault Reporting: Valve Actuators Can Monitor And Report Faults In Real Time, Including Jamming Or Other Problems That Prevent The Valve From Fully Opening/Closing, And Output Fault Warning Signals To Ensure That Problems Are Detected And Dealt With In A Timely Manner.
Precise Positioning And Overload Protection: Built-In High-Performance Brushless Motor Control Module Realizes Frequency And Speed Control To Ensure Accurate Control Of Valve Position. At The Same Time, The Built-In Motor Overload Protection Mechanism Prolongs The Service Life Of The Equipment.
Intuitive Display And Energy-Saving Design: Equipped With 1.3-Inch OLED Display, No Visual Dead Angle, High Brightness, Energy Saving And Environmental Protection. Real-Time Display Of Valve Opening And External Control Commands, About 5 Minutes After Automatic Sleep Mode, While Maintaining The Position Status And Control Command Prompt Function.

                                                                         
Product Overview:
◎ Valve Dimension: 1-1/4" 1-1/2"  2" BSPP or NPT Thread Available;
◎ Working Pressure: 217.5PSI(1.5Mpa);
◎ Actuator Rated Torque: 20N.m; 
◎ Recomand Install Below 15N.m Valvd Body; 
◎ Rated Voltage: 24VAC/DC;
◎ Position Feedback:  4-20ma; 
◎ Position Accuracy: ±1%(Set By Software); 
◎ Adopted High-Performance Brushless Motor, Overload Protection of Internal Motor; 
◎ It can be used 20,000 times.*1; 
◎ Connection Standard: ISO5211 F03/F04/F05;

Electrical Data:
◎ Rated Voltage: AC/DC24V (AC18-28V; DC18-32V); 
◎ Power Consumption: 85W@Running, 1w@Holding; 
◎ Peak Current: 950mA@5ms; 
◎ Connecting Cable: 7*0.2mm² Cable, Voltage Withstand AC300V; 
◎ Fuse: 2A;

Functional Data:
◎ Rated Torque: 20N.m;
◎ Angle Of Rotation: 90°±2°;
◎ Max Angle Of Rotation: 330°±5°;
◎ Manual Operation: ※ Matching Hexagon Wrench, Wsing At No Power;
◎ Running Time: About 10S(Per 90°);
◎ Continuous Running: Continuous Running;
◎ Sound Power Level: Max 50dB(A);
◎ Position Indicator: Mechanical and Screen;

Working Conditions:
◎ Electricity Safety Level: III Type (Safety Low Voltage);
◎ Inflaming Retarding Level: V0 UL94 Test Method;
◎ Enclosure: IP67 As Per En60529/GB4208-2008(All Directions); F Type Can Add Dehumidifying Heater ;
◎ Insulation Resistance: 100MΩ/500VDC ;
◎ Withstand Voltage: 500VAC, 1Min;
◎ Medium Temperature: ≤80° Can Install To Actuator Directly; >80° Need To Install Bracket or Heat Radiation Stand;
◎ Indoor or Outdoor; If Exposed To The Rain or Sunshine, Need To Install Protective Device For The Actuator;
◎ Not Explosion Proof Products, Do Not Use Them in Flammable and Explosive Environment; 
◎ Ambient Temperature: -30℃ ~ 60℃;
◎ Non-operation Temperature: ≤-40℃ or ≥80℃;

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)